CDR File Module

From Yate Documentation
Revision as of 09:21, 11 January 2014 by Dana (Talk | contribs)

Jump to: navigation, search

This module is used to write the CDRs(call detail record) into a file. The configuration file is cdrfile.conf.

Cdrfile is a module that receives a call.cdr message (maybe from cdrbuild).

Contents

Configuration

The file used in configuration is cdrfile.conf.

Section [general]

  • file: string: Name of the file to write the CDR to
You should check that this file is log rotated - see '/etc/logrotate.d/yate'
Example: file=/var/log/yate-cdr.tsv
  • tabs: bool: Use tab-separated instead of comma-separated if format is missing.
tabs=true
  • combined: bool: Use combined CDR for all legs of a call.
combined=false
  • format: string: Custom format to use, overrides default.
Each ${parameter} is replaced with the value of that parameter in the call.cdr message.

Below are listed the format defaults for each mode combination:

  • tab-separated (.tsv), combined=false
format=${time} ${billid} ${chan} ${address} ${caller} ${called} ${billtime} ${ringtime} ${duration} ${direction} ${status} {reason}
  • tab-separated (.tsv), combined=true
format=${time} ${billid} ${chan} ${address} ${caller} ${called} ${billtime} ${ringtime} ${duration} ${status} ${reason} ${out_leg.chan}
${out_leg.address} ${out_leg.billtime} ${out_leg.ringtime} ${out_leg.duration} ${out_leg.reason}
  • comma-separated (.csv), combined=false
format=${time},"${billid}","${chan}","${address}","${caller}","${called}",${billtime},${ringtime},${duration},"${direction}","${status}","${reason}"
  • comma-separated (.csv), combined=true
format=${time},"${billid}","${chan}","${address}","${caller}","${called}",${billtime},${ringtime},${duration},"${status}","${reason}","${out_leg.chan}",
"${out_leg.address}",${out_leg.billtime},${out_leg.ringtime},${out_leg.duration},"${out_leg.reason}"

List of available variables that could be used to construct a CDR record

Note: in order for a parameter to be available in the CDR, it has to be enabled in cdrbuild.conf.

The "cdrwrite" parameter is special, a boolean value of false will prevent the CDR from being written. This is to avoid generating CDR records for utility channels while still being able to track them.

  • ${time} - UNIX time
  • ${billid} - billing record id
  • ${chan} - channel used
  • ${address} - destination address
  • ${caller} - username/number of the device that initiated/received the call
  • ${called} - destination number
  • ${callername} - caller id
  • ${billtime} - billable call duration, starts from the point when the remote party actually answers the call
  • ${ringtime} - total time of the call
  • ${direction} - has a value of outgoing or incoming
  • ${status} - disposition of the call
  • ${reason} - reason for call disconnection

Usage example

Set CDR billing

In many real-life situations CDR billing is done in seconds.

It's useful to set:

cdrbuild.conf

[general]
resolution=sec


Write CDR to file

1) Write CDRs with combined set on false and the format below:

cdrfile.conf

[general]
file=/var/log/yate-cdr.csv
format=${time},"${billid}","${chan}","${address}","${caller}","${called}",${billtime},${ringtime},${duration},"${direction}","${status}","${reason}"


To see the CDRs, open file /var/log/yate-cdr.csv


1389371573,"1389371436-1","sip/1","192.168.168.156:5060","103","104",43,20,63,"incoming","answered",""
1389371573,"1389371436-1","sip/2","192.168.168.18:1368","103","104",43,20,63,"outgoing","answered",""

2) Write CDRs with combined set on true and the format for CDR:

[general]
file=/var/log/yate-cdr.csv
combined=true
; comma-separated (.csv), combined=true
format=${time},"${billid}","${chan}","${address}","${caller}","${called}",${billtime},${ringtime},${duration},"${status}",\
"${reason}","${out_leg.chan}","${out_leg.address}",${out_leg.billtime},${out_leg.ringtime},${out_leg.duration},"${out_leg.reason}"

To see the CDRs, open file /var/log/yate-cdr.csv

1389374027,"1389373828-6","sip/6","192.168.168.18:1368","1234567890","103",36,25,61,"answered","","sip/7","192.168.168.156:5060",36,25,61,""

Converting call time

If you need a human and machine readable representation of the time column you can use the following AWK script:

awk 'BEGIN{FS=",";OFS=","} {$1=strftime("%Y%m%d%H%M%S",$1); print $0}' /var/log/yate-cdr.csv

The above assumes comma-separated format, the ${time} parameter is in the first column (the $1 positional parameter) and the CDR file is in its usual place.

Adapt the script as needed. You can make the date/time more readable by inserting separators in the time format:

awk 'BEGIN{FS=",";OFS=","} {$1=strftime("%Y-%m-%d %H:%M:%S",$1); print $0}' /var/log/yate-cdr.csv
2014-01-10 18:32:53,"1389371436-1","sip/1","192.168.168.156:5060","103","104",43,20,63,"incoming","answered",""
2014-01-10 18:32:53,"1389371436-1","sip/2","192.168.168.18:1368","103","104",43,20,63,"outgoing","answered",""
.........

See also

Personal tools
Namespaces

Variants
Actions
Preface
Configuration
Administrators
Developers