Connecting to GMail

In this example we are going to use simple gmail account where:

GMail_username - your GMail username.
GMail_password - your GMail account password.

Note: The options=allowplainauth parameter is required, otherwise login will fail.

We are going to set the gmail account in accfile so Yate will register to it. Then set Yate Server with Jingle in client mode.

From routing will set that all calls that comes to extension '123' will go to through the line to the gmail account set(mycontact@domain) the account must be online so that the call won't fail.

And for outgoing calls all calls that will be made to the account set in accfile will go to a SIP account set.

Set gmail account

In accfile.conf :

[MyGMailAccount]
enabled=yes
protocol=jabber
username=GMail_username
password=GMail_password
domain=gmail.com
options=allowplainauth

Load Jabber client module

Since jabberclient is a client module, not loaded when Yate is running in server mode, you must explicitly load it. To do that set in yate.conf:

[postload]
${modulepath}/client/jabberclient${modsuffix}=yes

Set Yate Server with jingle in client mode

By default the jingle channel detects Yate run mode and behaves accordingly. To use it in client mode when Yate runs as server, set in yjinglechan.conf:

[general]
servermode=no

Configure users

In regfile.conf

[123]
password=secretpass

Routing calls

In regexroute.conf :

[default]
; Route calls to contacts in MyGMailAccount roster
^123$=jingle/mycontact@domain;line=MyGMailAccount

; Route calls received on MyGMailAccount line
${in_line}MyGMailAccount=sip/sip:SIP_number@a.b.c.d

See Using jabber client in server mode and Jingle channel for more routing and setup details.

And know connect to the your SIP account and wait for gmail friends to call you. Or test the incoming calls by calling '123' extension.

See also

• Telephony
• Jabber Client With Jingle Yate Server
• Jingle channel