Search results

: Set it to 'yes' to detect NAT and re-register with public ip when NAT is detected : Set it to 'no' or ipaddress (e.g. 1.2.3.4 or 1.2.3.4:5060) to disable NAT detection

* [[SIP NAT|SIP with NAT]] ...ystem #7] (also known as C7) is a suite of communication protocols used in national and international telephony networks to provide signaling of calls and

::- Set it to 'yes' to detect NAT and re-register with public ip when NAT is detected ::- Set it to 'no' or ipaddress (e.g. 1.2.3.4 or 1.2.3.4:5060) to disable NAT detection

:::Attempt or not to drill a hole in NAT, overrides config file parameter

; nat_address: ipaddress: IP address to advertise in SDP, empty to use the local ; Set this parameter when you know your RTP is behind a NAT

... and check the audio: if you cannot hear the other end then you may have a NAT problem.

# Nokia SIP VoIP Sett. is required to make the setting for keeping a NAT hole open via CRLF packets # Phone is NAT aware, RPORT used, STUN not needed

... for traffic but pay attention that Cisco gateways' RTP does not deal with NAT.

...or traffic but pay attention that Mediant gateways' RTP does not deal with NAT.

...of the messages. An example for this is passing from an international to a national network. ...nal pointcodes. The SEP has a pointcode addressable only from the internal national network.<br/>