View source for ISUP Mangler

=== Configuration file===
 
 ; IMPORTANT!
 ; This feature module is not loaded automatically, it needs a line in yate.conf:
 ; [postload]
 ; ${modulepath}/sig/isupmangler${modsuffix}=yes
 
 
 ; Each section in this file describe an ISUP interceptor/mangler
 ; You can add, remove or disable sections and reload to apply the changes
 
 
 ;[mangler_name]
 ; The name of the mangler is reported in the address parameter with the CIC
 
 ; enable: boolean: Enable the mangler (default)
 ;enable=yes
 
 ; service: int: Service Information Field (protocol number)
 ; It is unlikely you will ever need to modify it
 ;service=5
 
 ; netindicator: keyword: Value of Network Indicator bits in the SIO
 ; Allowed values: international, spareinternational, national, reservednational
 ;netindicator=national
 
 ; pointcodetype: string: SS7 point code type (required)
 ; Can be one of ITU,ANSI,ANSI8,China,Japan,Japan5
 ;pointcodetype=
 
 ; defaultpointcode: string: DPC of the ISUP messages to match
 ;defaultpointcode=
 
 ; remotepointcode: string: OPC of the ISUP messages to match
 ;remotepointcode=
 
 ; symmetric: boolean: Match and mangle messages in the opposite direction too (DPC->OPC)
 ; Symmetric should be enabled if intercepting more than just IAM
 ;symmetric=no
 
 ; cic_min: int: Minimum circuit code to match
 ;cic_min=1
 
 ; cic_max: int: Maximum circuit code to match
 ;cic_max=16383