View source for Terminology for Yate implementation of SS7

==Example==

Let's assume you are to configure SEP 1 endpoint. To configure it you will have to define the connections to the two STP nodes from our network and the ISUP trunk for sending voice traffic.

According to the above schema we deduce that:
* SEP 1 pointcode: PC=5
* SEP 1 has 2 linksets, each linkset has 2 links.
** linkset1: between SEP 1 and STP 1. So localpointcode = 5 and adjacent pointcode = 1
*** linkset1 has 2 links
** linkset2: between SEP 1 and STP 2. So localpointcode = 5 and adjacent pointcode = 2
*** linkset2 has 2 links
* SEP 1 ISUP trunk with localpointcode = 5 and defaultpointcode = 100
* When defining the linksets you will also have to mark them as routes for reaching pointcode 100: route=100



'''Other documentation'''

Please see the [[Introduction]] and [[How_To's#SS7_Setups | Usage Scenarios]]. Look at [[Miscellaneous_configurations|Configuration]] to see how to define linksets, links and ISUP trunks.

Also take a look at the following external links: 

* [http://www.zytrax.com/tech/ss7/ss7-glossary.html SS7/SIGTRAN Glossary - zytrax.com]
* [http://www.learntelecom.com/telephony/ss7/ss7-glossary SS7 Glossary - learntelecom.com]