Stopping and restarting Yate
From Yate Documentation
(Difference between revisions)
| Line 1: | Line 1: | ||
| + | |||
| + | |||
| + | === Signals and keys for a running Yate=== | ||
While running the following signals and keys are trapped and used: | While running the following signals and keys are trapped and used: | ||
| Line 5: | Line 8: | ||
- SIGHUP and SIGQUIT (Ctrl-\) will reinitialize the modules | - SIGHUP and SIGQUIT (Ctrl-\) will reinitialize the modules | ||
| − | If you have [[rmanager]] module you can also connect to port 5038 and use "stop" to stop the engine, and "reload" to reload the configurations. | + | === Telnet commands === |
| + | |||
| + | If you have [[rmanager]] module enabled, you can also connect to port 5038 and use command "stop" to stop the engine, and "reload" to reload the configurations. | ||
'''Note''' that the modules are not reloaded, only their [[Configuration Files|configuration files]] are read. Also note that some modules have options that are read only on the first initialization. | '''Note''' that the modules are not reloaded, only their [[Configuration Files|configuration files]] are read. Also note that some modules have options that are read only on the first initialization. | ||
| + | |||
| + | === Yate started in supervised mode=== | ||
If Yate is started in supervised mode (command line option -s) it can also be restarted from rmanager using "stop 128" - in fact any code between 128 and 255. The program will be stopped cleanly then the supervisor will restart it with the same command line options. | If Yate is started in supervised mode (command line option -s) it can also be restarted from rmanager using "stop 128" - in fact any code between 128 and 255. The program will be stopped cleanly then the supervisor will restart it with the same command line options. | ||
| + | |||
| + | === Yate as a service=== | ||
| + | |||
| + | If Yate was set as a service use commands: | ||
| + | |||
| + | service yate stop | ||
| + | service yate restart | ||
Revision as of 17:21, 15 January 2013
Contents |
Signals and keys for a running Yate
While running the following signals and keys are trapped and used:
- SIGTERM and SIGINT (Ctrl-C) will cleanly stop the engine - SIGHUP and SIGQUIT (Ctrl-\) will reinitialize the modules
Telnet commands
If you have rmanager module enabled, you can also connect to port 5038 and use command "stop" to stop the engine, and "reload" to reload the configurations.
Note that the modules are not reloaded, only their configuration files are read. Also note that some modules have options that are read only on the first initialization.
Yate started in supervised mode
If Yate is started in supervised mode (command line option -s) it can also be restarted from rmanager using "stop 128" - in fact any code between 128 and 255. The program will be stopped cleanly then the supervisor will restart it with the same command line options.
Yate as a service
If Yate was set as a service use commands:
service yate stop service yate restart
