SIP Routing in Yate
From Yate Documentation
(Difference between revisions)
(→Configure a SIP line) |
|||
| (11 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | + | SIP routing in Yate can be done from a single routing module or from a combination of modules. | |
| − | + | The calls can be routed directly to a SIP channel from a routing module (e.g regexroute.conf). | |
| − | From a routing module (e.g regexroute.conf) you can call an sip channel like this: | + | |
| + | Another way to route the calls is by using a SIP line(gateway) configured in accfile.conf. | ||
| + | |||
| + | == Route to a SIP channel== | ||
| + | |||
| + | From a [[Routing|routing module]] (e.g regexroute.conf) you can call an sip channel like this: | ||
;extension match rule=sip/sip:user@ip:port | ;extension match rule=sip/sip:user@ip:port | ||
^100$=sip/sip:user@ip:port | ^100$=sip/sip:user@ip:port | ||
| − | + | == Route to a SIP line== | |
| + | |||
| + | === Configure a SIP line=== | ||
| − | + | From [[Accfile|accfile.conf]] you can configure a SIP line. In this case Yate is registers to a remote server.<br> | |
| − | From accfile.conf you can configure a SIP line. In this case Yate is registers to a remote server.<br> | + | |
Sections with enabled=no are always ignored so you have to changed them to enabled=yes. | Sections with enabled=no are always ignored so you have to changed them to enabled=yes. | ||
| Line 24: | Line 30: | ||
* domain: Authentication domain if any | * domain: Authentication domain if any | ||
* outbound: Optional outbound proxy server if different from registrar. A port can be specified here (e.g. 1.2.3.4:7999) | * outbound: Optional outbound proxy server if different from registrar. A port can be specified here (e.g. 1.2.3.4:7999) | ||
| − | * ip_transport: Optional SIP transport to use ( | + | * ip_transport: Optional SIP transport to use (UDP, TCP, TLS). |
| − | + | * ip_transport_localip / ip_transport_localport: | |
| − | + | ::- UDP: Used to identify the listener to use | |
| − | * ip_transport_localip: | + | ::- TCP/TLS: Optional local ip/port to bind on when connecting |
| − | ::- UDP: | + | |
| − | ::- TCP/TLS: Optional local ip to | + | |
* localaddress: Local address to set in sent messages | * localaddress: Local address to set in sent messages | ||
| Line 35: | Line 39: | ||
::- Set it to 'no' or ipaddress (e.g. 1.2.3.4 or 1.2.3.4:5060) to disable NAT detection | ::- Set it to 'no' or ipaddress (e.g. 1.2.3.4 or 1.2.3.4:5060) to disable NAT detection | ||
* keepalive: Optional interval for NAT keep alive. | * keepalive: Optional interval for NAT keep alive. | ||
| − | '''Note:''' Default port is 5060 for | + | '''Note:''' Default port is 5060 for UDP/TCP and 5061 for TLS |
This is an example: | This is an example: | ||
| Line 54: | Line 58: | ||
localaddress=192.168.0.1:5062 | localaddress=192.168.0.1:5062 | ||
| − | + | ===Route to the configured line=== | |
| − | Route a call to the SIP line configured above: | + | Route a call to the [[Accfile|SIP line]] configured above: |
regexroute.conf | regexroute.conf | ||
^100$=line/100;line=test_sip | ^100$=line/100;line=test_sip | ||
| + | |||
| + | * this rule will match the number called: 100 and will route the call through the gateway | ||
| + | * the line parameter is fixed. | ||
| + | * line=test_sip will tell Yate on which gateway/account to route the call. | ||
'''See also''' | '''See also''' | ||
| − | *[[Routing| Routing in Yate]] | + | * [[Routing| Routing in Yate]] |
| − | *[[Accfile| Accfile module]] | + | * [[Accfile| Accfile module]] |
| − | *[[Regular | + | * [[Regular expressions|Regular expressions Route Module]] |
| + | * [[Telephony]] | ||
| + | |||
| + | [[Category:SIP]] [[Category:Routing]] | ||
Latest revision as of 10:08, 23 November 2017
SIP routing in Yate can be done from a single routing module or from a combination of modules.
The calls can be routed directly to a SIP channel from a routing module (e.g regexroute.conf).
Another way to route the calls is by using a SIP line(gateway) configured in accfile.conf.
Contents |
[edit] Route to a SIP channel
From a routing module (e.g regexroute.conf) you can call an sip channel like this:
;extension match rule=sip/sip:user@ip:port ^100$=sip/sip:user@ip:port
[edit] Route to a SIP line
[edit] Configure a SIP line
From accfile.conf you can configure a SIP line. In this case Yate is registers to a remote server.
Sections with enabled=no are always ignored so you have to changed them to enabled=yes.
Parameter description for SIP:
- protocol: The protocol to register on
- username: Account username
- password: Account password
- interval: Registration interval (in seconds) to request from server
- description: Caller name to set on outgoing calls on this account if none specified when routing
- registrar: Registrar address. A port can be specified here (e.g. 1.2.3.4:7999)
- authname: Authentication name to use instead of username when authenticating
- domain: Authentication domain if any
- outbound: Optional outbound proxy server if different from registrar. A port can be specified here (e.g. 1.2.3.4:7999)
- ip_transport: Optional SIP transport to use (UDP, TCP, TLS).
- ip_transport_localip / ip_transport_localport:
- - UDP: Used to identify the listener to use
- - TCP/TLS: Optional local ip/port to bind on when connecting
- localaddress: Local address to set in sent messages
- - Set it to 'yes' to detect NAT and re-register with public ip when NAT is detected
- - Set it to 'no' or ipaddress (e.g. 1.2.3.4 or 1.2.3.4:5060) to disable NAT detection
- keepalive: Optional interval for NAT keep alive.
Note: Default port is 5060 for UDP/TCP and 5061 for TLS
This is an example: Configure a SIP line called [test_sip].
accfile.conf
[test_sip] enabled=yes protocol=sip username=me description=Test SIP account interval=600 authname=metoo password=1234 domain=somewhere.org registrar=10.0.0.1:5060 outbound=10.0.0.1:5061 localaddress=192.168.0.1:5062
[edit] Route to the configured line
Route a call to the SIP line configured above:
regexroute.conf
^100$=line/100;line=test_sip
- this rule will match the number called: 100 and will route the call through the gateway
- the line parameter is fixed.
- line=test_sip will tell Yate on which gateway/account to route the call.
See also
