ConvertingAudio

Latest revision as of 11:06, 8 October 2012

Yate has a wavefile module which is capable of playing audio in a number of formats.

[edit] Converting WAV files

If you have a wav file, you can convert it using the SoX program.

- Raw linear, signed 16 bit, mono, 8000 Hz (.slin)

   sox file.wav -t raw -r 8000 -c 1 -w -s file.slin

- Raw mu-law, mono, 8000 Hz (.mulaw or .u)

   sox file.wav -t raw -r 8000 -c 1 -b 8 -U file.mulaw

- Raw A-law, mono, 8000 Hz (.alaw or .A)

   sox file.wav -t raw -r 8000 -c 1 -b 8 -A file.alaw

- Raw GSM, mono, 8000 Hz (.gsm)

   sox file.wav -t raw -r 8000 -c 1 -b 8 -g file.gsm
   (not all versions of sox support this conversion)

- SUN/SGI audio/basic file, mono 8000 Hz (.au) containing:

   - Signed linear
       sox file.wav -r 8000 -c 1 -w -s file.au
   - alaw
       sox file.wav -r 8000 -c 1 -b 8 -A file.au
   - mulaw
       sox file.wav -r 8000 -c 1 -b 8 -U file.au

In addition basic format "conversion" if needed:

- WAV into RAW (tested with an A-law, mono, 8000 Hz riff wavefile)

   sox file.wav file.raw

The SUN/SGI formats have the advantage of being easily playable in a Web browser and it also preserves the format information.

The output format should always be mono, 8 kHz as that is required for telephony.

[edit] Converting into WAV files

If you have a mono 8kHz raw data file you can convert it into wave file by using [[1]]

- Raw A-law, mono, 8000 Hz (.alaw or .A)

   sox -t raw -r 8000 -A -b 8 -c 1 file.alaw file.wav

- mulaw, mono 8000 Hz (.mulaw)

   sox -t raw -r 8000 -U -b 8 -c 1 file.mulaw test.wav