SCCP decoder

Revision as of 16:03, 26 October 2017

This is a special non-standard feature of YATE.

The SCCP can be used as a SCCP message decoder. This case can be found if SCCP is used with M3UA-GW.

YATE M3UA-GW has the ability to route messages to ASPs based on SCCP GT or/and SSN, in this way the SCCP is used to decode the SCCP message for M3UA-GW so that the gateway can look for the routing parameters.

To activate this feature set in ysigchan.conf

[sccp]
type=ss7-sccp
pointcodetype=ITU
localpointcode=7
priority=0
decoder=true

See also:

• SCCP Introduction
• [[SCCP Address Translation]
• STP SCCP configuration
• SEP SCCP configuration
• Configure SCCP and GTT