Chan.dtmf
From Yate Documentation
(Difference between revisions)
(Created page with "The '''chan.dtmf''' is used for sending DTMFs between modules in the engine. === Parameters === '''driver''' :::the name of the module that sent the DTMF '''id''' :::id of ...") |
Revision as of 10:19, 8 October 2012
The chan.dtmf is used for sending DTMFs between modules in the engine.
Parameters
driver
- the name of the module that sent the DTMF
id
- id of the channel who sent the DTMF
targetid
- id of the channel who is suppose to receive the DTMF
text
- text of the DTMF
duration
- how long is the tone of the DTMF (this isn't very much used)
At least for Yate-0.9-CVS, the format is as follows:
id
- id of the channel that sent the DTMF
peerid
- id of the channel that should receive the DTMF
module
- the name of the module that sent the DTMF
status
- the status of the call within which the DTMF has been generated
address
- the IP address of the calling party
text
- text (usually digit) of the DTMF
