Setting up Yate with ISDN BRI

Revision as of 17:42, 30 October 2013

ISDN BRI was tested with wanpipe drivers version: wanpipe-7.0.5
Wanpipe drivers download: http://wiki.sangoma.com/wanpipe-linux-drivers#beta

In ysigchan.conf

[bri-net]
type=isdn-bri-net
sig=wanpipe1
voice=wanpipe1

In tdmcard.conf

[wanpipe1]
span=1
type=NET
increment=3
start=0

[bri-cpe]							
type=isdn-bri-cpe
sig=wanpipe3
voice=wanpipe3

In tdmcard.conf

[wanpipe3]
span=3
type=CPE
increment=3
start=0

Example routing in regexroute.conf:

[default]
^123$=sig/123;trunk=bri-net

Revision as of 17:39, 30 October 2013 (view source) Monica (Talk \| contribs) (→‎ISDN BRI Network) ← Older edit		Revision as of 17:42, 30 October 2013 (view source) Monica (Talk \| contribs) Newer edit →
Line 1:		Line 1:
−	~~Wanpipe~~ drivers version: wanpipe-7.0.5 <br/>	+	ISDN BRI was tested with wanpipe drivers version: wanpipe-7.0.5 <br/>
	Wanpipe drivers download: http://wiki.sangoma.com/wanpipe-linux-drivers#beta		Wanpipe drivers download: http://wiki.sangoma.com/wanpipe-linux-drivers#beta