Alsachan
From Yate Documentation
(Difference between revisions)
(Created page with "This module can be used either to test your Yate or to use Yate as a VoIP client with [http://www.alsa-project.org/ ALSA] drivers. From a routing module you can call the soun...") |
Revision as of 14:51, 16 October 2012
This module can be used either to test your Yate or to use Yate as a VoIP client with ALSA drivers.
From a routing module you can call the sound card like this.
^1$=alsa/default
The alsachan is intialized depending on what parameter you use to call it from the routing module. The default settings are what you are going to use in most cases.
To select a specific device you need to specify something like alsa/plughw:0,0 - please check the ALSA documentation on the naming conventions. Consider ALSA device names and ALSA PCM interface for start.
If you want to make your alsachan the default in Yate client put in yate-qt4.conf:
[client] device=alsa/default