Search results

...ed. Furthermore, new operations can be defined and implemented by external modules.

The most important aspect of Yate is its message-passing system. Modules are passing around messages among them. This allows us to have a bigger fle * '''Yate Modules''' - modules of Yate are equal no matter if they are telephony or routing or anything el

... In those cases the mapping of the called number must be done from routing modules.

This is a brief introduction on how the PSTN signalling modules are working together in Yate.

... in Yate can be done from a single routing module or from a combination of modules.

The '''chan.startup''' message is sent by channel modules when a new channel is instantiated. ...nnels like Tone Generator and Wave File do not emit this message. External modules also have to emit it themselves.

The chan.hangup message is sent by channel modules when a channel is hung up - typically this is the last message ever seen ab ...nnels like Tone Generator and Wave File do not emit this message. External modules also have to emit it themselves.

The '''chan.dtmf''' is used for sending DTMFs between modules in the engine.

It is understood by at least [[wavefile]] and [[tonegen]] modules.

* [[Modules]]

For external modules/scripts, the dumb channel module provides Data Endpoints to and from nowher * [[Modules]]

... Tone Generator, Wave File and RTP modules can provide data nodes to other modules. :::desired sample rate of the attached data node(s), default 8000Hz; not all modules support sample rate setting

* [[Modules]]

... certain user from an authentication module. If none of the authentication modules ([[regfile]]) know about this user then the module who started authenticati The default is to have all modules attempt to perform authentication:

Since the message should be observed by multiple modules all handlers ''must'' return false.

...dule that a user has been registered in system. If none of the registering modules (e.g. [[regfile]]) accept the registration then the module which started re

...r will be replaced with a pointer to an YRTPWrapper object, allowing orher modules to access RTP channel's internal objects (Socket, DataSource, DataConsumer,

...e.g. accfile or client). The message is targeted towards channel-providing modules (e.g. h323chan or ysipchan).

'''engine.timer''' is a message sent by the engine to the modules that have a message handler registered for it and is intended to act as a m

'''engine.halt''' is a message sent by the engine to the modules that have a message handler registered for it. ...s it only serves as a means of shutdown notification towards the listening modules.

'''engine.status''' is used now from rmanager to find out the status of the modules. In fact "status" command from rmanager module is sending this message and

; The gateway name is a string that can be referenced from other modules

$modules = array( foreach ($modules as $module) {

* [[Modules]]

This modules is controlled indirectly by [[Ysigchan#Status_and_control_commands|ysigchan * [[Modules]]

This module has no configuration, all parameters are received from other modules like [[SigTransport]] when asked to create a SCTP socket. * [[Modules]]

* [[Modules]]

* [[Modules]]

...files directory (/usr/local/etc/yate)<br>user files directory (~/.yate)<br>modules directory (/usr/local/lib/yate)<br><br> (Type “yate -h” in your bash to ...g as a server with the new configuration files, the rest of the neccessary modules being loaded from their standard location.<br> Strongly recommended:<br> Wh

.../local/etc/yate)<br>Path to user files directory (/root/.yate)<br> Path to modules directory (/usr/local/lib/yate)<br><br> (Type “yate -h” in your bash to ...g as a server with the new configuration files, the rest of the neccessary modules being loaded from their standard location.<br>Strongly recommended:<br>

In some cases modules haven't been well compiled and you will get a message like "unresolved symb -m pathname Path to modules directory (/usr/local/lib/yate)

... Yate in the install directory (with default paths to configuration files, modules ...). -m pathname Path to modules directory (.\modules)

* [[Modules]]

...bstractization between the SIP protocol and the subscriptions and register modules that implement the above functions in a protocol-independent way. ...ip.generate]] message with method=NOTIFY. resource.notify is sent from the modules that follow the events and decide when notifications should be sent (e.g. [

...abase can be configured in [[Modules#Database_Drivers| mysqldb.conf]] or [[Modules#Database_Drivers|pgsqldb.conf]]<br>

By default Yate loads modules relevant to its current running mode: * all modules from the base module directory

* [[Modules]]

[modules] indicating that the fax module was loaded. If not, check your yate.conf / modules directory (do you have it in a compiled state already?)

* [[Modules]]

* [[Modules]]

; If enabled the performance will grow but parameter altering in external modules

The following modules are required:

When Yate starts you can see a list of modules that are loaded. If PostGreSQL does not appear, you must install the devel ...onf'''. If parameter '''modload''' is disabled, then you have to check in [modules] section that module is enabled.

* [[Modules]]

* [[Modules#Resource_subscribe.2Fnotify_modules|Modules]]

When Yate starts you can see a list of modules that are loaded. If MySQL does not appear, you must install the devel packa ...onf'''. If parameter '''modload''' is disabled, then you have to check in [modules] section that module is enabled.

* [[Modules]]

* [[Modules]]

..., for example to be routed via the register module / the database or other modules.

Cdrbuild module reads messages from other channel modules ([[H323_channel_module|h323chan]], [[SIP_Configuration_File|ysipchan]], [[I ...]]" message. This message is caught by different [[Modules#CDR modules|cdr modules]] that intend to write in different mediums ([[CDR_File_Module#Configuratio