Stopping and restarting Yate
(Created page with " While running the following signals and keys are trapped and used: - SIGTERM and SIGINT (Ctrl-C) will cleanly stop the engine - SIGHUP and SIGQUIT (Ctrl-\) will reinitia...") |
(→Yate started as a service) |
||
| (8 intermediate revisions by one user not shown) | |||
| Line 1: | Line 1: | ||
| + | |||
| + | There are different ways of stopping and restarting Yate depending on how Yate was installed and configured. | ||
| + | |||
| + | === Signals and keys for a running Yate=== | ||
While running the following signals and keys are trapped and used: | While running the following signals and keys are trapped and used: | ||
| Line 5: | Line 9: | ||
- SIGHUP and SIGQUIT (Ctrl-\) will reinitialize the modules | - SIGHUP and SIGQUIT (Ctrl-\) will reinitialize the modules | ||
| − | If you have [[rmanager]] module you can also connect to port 5038 and use "stop" to stop the engine, and "reload" to reload the configurations. Note that the modules are not reloaded, only their configuration files are read. Also note that some modules have options that are read only on the first initialization. | + | === Telnet commands === |
| + | |||
| + | If you have [[rmanager]] module enabled, you can also connect to port 5038 and use command "stop" to stop the engine, and "reload" to reload the configurations. | ||
| + | |||
| + | '''Note''' that the modules are not reloaded, only their [[Configuration Files|configuration files]] are read. Also note that some modules have options that are read only on the first initialization. | ||
| + | |||
| + | telnet 127.0.0.1 5038 | ||
| + | Trying 127.0.0.1... | ||
| + | Connected to localhost.localdomain (127.0.0.1). | ||
| + | Escape character is '^]'. | ||
| + | YATE 4.2.1-alpha1 (http://YATE.null.ro) ready on localhost.localdomain. | ||
| + | reload | ||
| + | Reinitializing... | ||
| + | stop | ||
| + | Engine shutting down - bye! | ||
| + | |||
| + | === Yate started in supervised mode=== | ||
If Yate is started in supervised mode (command line option -s) it can also be restarted from rmanager using "stop 128" - in fact any code between 128 and 255. The program will be stopped cleanly then the supervisor will restart it with the same command line options. | If Yate is started in supervised mode (command line option -s) it can also be restarted from rmanager using "stop 128" - in fact any code between 128 and 255. The program will be stopped cleanly then the supervisor will restart it with the same command line options. | ||
| + | |||
| + | === Yate started as a service=== | ||
| + | |||
| + | If Yate was set as a service use commands: | ||
| + | |||
| + | service yate stop | ||
| + | service yate restart | ||
| + | |||
| + | As a general note, use '''restart''' instead of '''start''' to avoid accidentally running multiple instances. | ||
| + | |||
| + | |||
| + | '''See also''' | ||
| + | |||
| + | * [[Paths and Directories]] | ||
| + | * [[Modules]] | ||
| + | |||
| + | [[Category:Administrate]] | ||
Latest revision as of 12:39, 4 November 2013
There are different ways of stopping and restarting Yate depending on how Yate was installed and configured.
Contents |
[edit] Signals and keys for a running Yate
While running the following signals and keys are trapped and used:
- SIGTERM and SIGINT (Ctrl-C) will cleanly stop the engine - SIGHUP and SIGQUIT (Ctrl-\) will reinitialize the modules
[edit] Telnet commands
If you have rmanager module enabled, you can also connect to port 5038 and use command "stop" to stop the engine, and "reload" to reload the configurations.
Note that the modules are not reloaded, only their configuration files are read. Also note that some modules have options that are read only on the first initialization.
telnet 127.0.0.1 5038 Trying 127.0.0.1... Connected to localhost.localdomain (127.0.0.1). Escape character is '^]'. YATE 4.2.1-alpha1 (http://YATE.null.ro) ready on localhost.localdomain. reload Reinitializing... stop Engine shutting down - bye!
[edit] Yate started in supervised mode
If Yate is started in supervised mode (command line option -s) it can also be restarted from rmanager using "stop 128" - in fact any code between 128 and 255. The program will be stopped cleanly then the supervisor will restart it with the same command line options.
[edit] Yate started as a service
If Yate was set as a service use commands:
service yate stop service yate restart
As a general note, use restart instead of start to avoid accidentally running multiple instances.
See also
