Yate as SIP server

Revision as of 16:56, 10 October 2012

Why this document

Learn how to:

• modify Yate's configuration files in order to use it as SIP server;
• use Yate Client as an SIP client;
• set up a telephony account on a SNOM 360 phone.

Main concepts

The important issue in this article is that Yate knows SIP protocol.

Test situation

To check this functionality Yate as a SIP server use:

• a Yate installed on a server, this is used as SIP Server
• a Yate Client installed on another server.See Download section.
• a SNOM phone (you can follow the steps from this tutorial: to configure SNOM phone)

The purpose of this configuration schema is to make calls from SNOM phone to account in Yate client using a SIP server or viceversa.

The easiest way to do it is to register this 2 accounts in regfile.conf and in ysipchan.conf you can use the general set up. The port options sets the port to which Yate will bind for SIP signalling. You may also specify an IP address (for multihomed machines) else Yate will listen on all interfaces.

So in configuration files set:

regfile.conf

[100]
password=mysecret1

[200]
password=mysecret2

Start Yate Server.

Configure SNOM phone, follow this steps.

Configure the other account set in regfile in your Yate client:

After all configuration it is done you can make calls.