Search results

Page title matches

• About ISDN
  ...er results regarding quality and speed than the analog systems. Basically, ISDN is the digitization of the PSTN infrastructure. ===Why ISDN?===
  6 KB (1,091 words) - 15:03, 21 August 2013
• Setting up Yate with ISDN BRI
  ISDN BRI support in Yate was tested with wanpipe drivers version: wanpipe-7.0.5 ==ISDN BRI Network==
  724 B (91 words) - 08:34, 4 November 2013

Page text matches

• What is Yate
  * ISDN passive and active recorder * ISDN, RBS, analog passive recorder
  3 KB (376 words) - 12:42, 4 November 2013
• VoIP PSTN Gateway
  Yate can be configured as a gateway from SIP to ISDN or from SIP to SS7(ISUP) by using local circuits like Sangoma cards or by u ...s article will use Sangoma card and will use Yate as a gateway from SIP to ISDN.
  10 KB (1,440 words) - 16:11, 31 October 2013
• H323 Gatekeeper And Multiple Endpoint Server
  Q931 is the call signaling protocol for ISDN networks. The information included in the H225 data which also like stated
  4 KB (562 words) - 15:04, 19 November 2012
• How To's
  * [[Setting up Yate with ISDN BRI]] Guide to use Yate with ISDN BRI.
  9 KB (1,376 words) - 10:01, 27 October 2017
• Call End Causes
  ...www.itu.int/rec/T-REC-Q.850/e Q.850] defining cause and location codes for ISDN. !ISDN
  3 KB (380 words) - 09:25, 4 November 2013
• Telephony
  *[[About ISDN]]
  8 KB (1,083 words) - 11:49, 27 October 2017
• Zapcard
  ; configured as voice circuits or signalling only (SS7, ISDN etc) circuits ...T1: channels 12 and 24 are going to be used as signalling (D-Channels) for ISDN or SS7, all other channels are used as B-Channels
  11 KB (1,770 words) - 10:23, 4 November 2013
• Wpcard
  [[Category:Sangoma]] [[Category:ISDN]]
  9 KB (1,147 words) - 10:13, 4 November 2013
• CiscoSM
  ; Ciscos use version 0 for SLT / SS7 backhaul, version 1 for ISDN backhaul
  3 KB (474 words) - 12:05, 26 October 2017
• Mobile networks
  '''ISUP''' - ISDN User Part Protocol<br>
  4 KB (547 words) - 10:52, 20 March 2013
• Modules
  SS7/ISDN protocol implementations based on our own signalling library (for Yate >= 2 ISDN E1/T1 driver over Wanpipe for Linux. Supports [http://www.sangoma.com Sango
  12 KB (1,662 words) - 13:25, 1 October 2019
• Monitoring
  ; monitor ISDN. Overrides the monitor value. Defaults to the monitor value. ;isdn=
  5 KB (817 words) - 11:29, 4 November 2013
• Beginners in Yate
  ...nded. It supports SIP, H.323, IAX, MGCP, Jingle, Jabber, E1, T1, analogic, ISDN PRI, BRI, and SS7.<br>
  5 KB (888 words) - 13:05, 10 March 2015
• Installing Sangoma cards under Windows
  ...s at this point, the difference between E1 and T1 is that the T1 setup for ISDN uses the 24th channel as a D channel and E1 the 16th.
  4 KB (590 words) - 16:13, 31 October 2013
• About VoIP
  * Q931 is the call signaling protocol for ISDN networks. The information included in the H225 data which also like stated * [[About ISDN]]
  19 KB (3,169 words) - 11:20, 16 September 2013
• About PSTN
  * [[About ISDN]]
  5 KB (774 words) - 15:04, 21 August 2013
• About ISDN
  ...er results regarding quality and speed than the analog systems. Basically, ISDN is the digitization of the PSTN infrastructure. ===Why ISDN?===
  6 KB (1,091 words) - 15:03, 21 August 2013
• Setting up Yate with ISDN BRI
  ISDN BRI support in Yate was tested with wanpipe drivers version: wanpipe-7.0.5 ==ISDN BRI Network==
  724 B (91 words) - 08:34, 4 November 2013
• Compatibility
  A gateway is a device which connects either to ISDN (PRI/BRA) or an analog (FXO) line.
  9 KB (1,256 words) - 07:01, 25 September 2015
• Configuring DAHDI (Zaptel) TDM cards
  ...e cards provide voice channels and also support for signaling SS7 MTP2 (or ISDN Q.921).<br>
  251 B (34 words) - 14:12, 26 October 2017