Installing Yate from RPMs
From Yate Documentation
If you want to get Yate up and running on your RedHat-based system, here is hopefully the quickest way to get going.
Contents |
Download RPMs
Download the Yate RPM for your CPU type, into your favourite folder (we use /usr/src).
Run the following command
rpm -Uhv yate-4.3.0-1mdv2009.1.x86_64.rpm
(this file name may change so just type rpm -Uhv yat and then press tab and let the shell complete the name for you)
Start Yate
Here is the command to start Yate:
service yate start
Start Yate on system boot command
If you want Yate to start every time on boot, type this:
chkconfig --level 345 yate on
See also
