-
* ISDN passive and active recorder
* ISDN, RBS, analog passive recorder
3 KB (376 words) - 12:42, 4 November 2013
-
Yate can be configured as a gateway from SIP to ISDN or from SIP to SS7(ISUP) by using local circuits like Sangoma cards or by u
...s article will use Sangoma card and will use Yate as a gateway from SIP to ISDN.
10 KB (1,440 words) - 16:11, 31 October 2013
-
...d for VoIP communication. Over the Internet are many more then one debates about H323 vs. SIP, that may lead to the conclusion that H323 is pretty much the
Q931 is the call signaling protocol for ISDN networks. The information included in the H225 data which also like stated
4 KB (562 words) - 15:04, 19 November 2012
-
Useful information from various users about routing.
* [[Setting up Yate with ISDN BRI]]
9 KB (1,376 words) - 10:01, 27 October 2017
-
...www.itu.int/rec/T-REC-Q.850/e Q.850] defining cause and location codes for ISDN.
!ISDN
3 KB (380 words) - 09:25, 4 November 2013
-
|class="yate-header-left"|'''About'''
|class="yate-header-left"|'''About'''
8 KB (1,083 words) - 11:49, 27 October 2017
-
; configured as voice circuits or signalling only (SS7, ISDN etc) circuits
...T1: channels 12 and 24 are going to be used as signalling (D-Channels) for ISDN or SS7, all other channels are used as B-Channels
11 KB (1,770 words) - 10:23, 4 November 2013
-
[[Category:Sangoma]] [[Category:ISDN]]
9 KB (1,147 words) - 10:13, 4 November 2013
-
; Ciscos use version 0 for SLT / SS7 backhaul, version 1 for ISDN backhaul
3 KB (474 words) - 12:05, 26 October 2017
-
'''ISUP''' - ISDN User Part Protocol<br>
For more informations about the the interfaces and the protocol operating at each layer please see:
4 KB (547 words) - 10:52, 20 March 2013
-
SS7/ISDN protocol implementations based on our own signalling library (for Yate >= 2
ISDN E1/T1 driver over Wanpipe for Linux. Supports [http://www.sangoma.com Sango
12 KB (1,662 words) - 13:25, 1 October 2019
-
; About a number of C calls (succeeded or not from the ASR/NER standpoint) can trig
; monitor ISDN. Overrides the monitor value. Defaults to the monitor value.
5 KB (817 words) - 11:29, 4 November 2013
-
...nded. It supports SIP, H.323, IAX, MGCP, Jingle, Jabber, E1, T1, analogic, ISDN PRI, BRI, and SS7.<br>
For more details about what parameters that can be set when Yate starts you can give command
5 KB (888 words) - 13:05, 10 March 2015
-
...s at this point, the difference between E1 and T1 is that the T1 setup for ISDN uses the 24th channel as a D channel and E1 the 16th.
4 KB (590 words) - 16:13, 31 October 2013
-
<!--This section holds general information about VoIP, various protocols and typical VoIP applications and setups.
...ne who has a analog or digital telephone line, no matter if we are talking about a local, long distance, mobile or international call.
19 KB (3,169 words) - 11:20, 16 September 2013
-
===About telephone exchanges===
... that handles connections. This term, exchange, is also used when speaking about an area server by a switch, or it can refer to the first three digits of th
5 KB (774 words) - 15:04, 21 August 2013
-
...er results regarding quality and speed than the analog systems. Basically, ISDN is the digitization of the PSTN infrastructure.
===Why ISDN?===
6 KB (1,091 words) - 15:03, 21 August 2013
-
ISDN BRI support in Yate was tested with wanpipe drivers version: wanpipe-7.0.5
==ISDN BRI Network==
724 B (91 words) - 08:34, 4 November 2013
-
A gateway is a device which connects either to ISDN (PRI/BRA) or an analog (FXO) line.
9 KB (1,256 words) - 07:01, 25 September 2015
-
...e cards provide voice channels and also support for signaling SS7 MTP2 (or ISDN Q.921).<br>
251 B (34 words) - 14:12, 26 October 2017
