Search results

...roject. This site is currently in development. Please fell free to help us to improve this Wiki!'' <font class="basetext">It brings [[Connecting To Google Voice|better Gvoice support]], iSAC codec, support for new Wanpipe d

How Yate processes SIP request methods and how to enable methods that are not handled by default. Route to a SIP channel and a SIP Line.

By default Yate loads modules relevant to its current running mode: You just need to list all .yate files in those directories.

..., segmentation, connection-orientation, and error correction facilities in SS7 networks. It relies on MTP for basic routing and error detection. ...es in SS7 networks. It's unique and identifies a single destination in the SS7 network.

...messages to ASPs based on SCCP GT or/and SSN, in this way the SCCP is used to decode the SCCP message for M3UA-GW so that the gateway can look for the ro To activate this feature set in ysigchan.conf

...s messages, instead it transfers the messages to other SS7 nodes that need to do the processing.<br/> Given this fact, a STP needs to be connected to multiple SS7 nodes, usually other STPs and possible one or more SEPs.<br/>

When using SCCP in a SEP, the SCCP must have a SCCP application above it to process the messages. This is usually a TCAP application.<br/> To configure a SCCP layer on a SEP you need the following:

...type of the messages. An example for this is passing from an international to a national network. In order to achieve this you must create a SCCP entity for each network type.<br/>

... page is to provide a glossary of terms used throughout this documentation to avoid misinterpretation of terms. Bellow is a typical example of a SS7 network. The schema focuses on the SEP 1 node and presents the elements fro

This is a brief introduction on how the PSTN signalling modules are working together in Yate. Supports FXS and FXO interfaces, signaling is associated to each channel