Search results

Park any call to 2000 to parking orbit park/1 and attach the 'tone/dial' data source to it ^2000$=park/1;source=tone/dial

...0,h323%z90,pbx%z90,yrtp%z90,jingle%z90,enumroute%z90,conf%z90,callfork%z90,tone%z90,sip%z90,analyzer%z90,stun%z90,<br>gvoice%z90,dumb%z90,sipfeatures%z90,m

:Data source to attach to the outgoing call. You can use something like ''tone/ring''

...path of a call. It works by analyzing if a probe signal generated by the [[tonegen]] module is received altered. ... order of typical VoIP packetization (20 or 30ms) while the high frequency tone tries to catch problems with resamplers, codecs and analog segments.

...inband detection of '''DTMF''', '''DNIS''', '''Fax''' and '''Continuity''' tones. The audio signal must be perfect quality (no codecs in the data path) whi ...tmf]] as the channel to which it is attached. On detection of a continuity tone a DTMF with the text '''O''' is masqueraded.

99991001 - you should hear dial tone 99991002 - you should hear busy tone

...f the operation faills or it's not allowed, you are going to hear an error tone.

// '''assuming m.getResult(0,0) returns "tone/busy" or "sip/sip:345@10.11.12.13"'''

* Return tone: *7

...answer the phone from ten to ten seconds. IVR can be either based on touch tone or speech recognition so instead of pressing the x key on your phone you ma

* dial tone and ringing signals ...t, then the DTMF tone-signaling were introduced. Since then, these are the tones used in PSTN. Of course, there existed a period when special hardware had

ysipchan ystunchan h323chan tonedetect moh callfork* pbx yjinglechan tonegen ilbccodec* yrtpchan enumroute analyzer

* [[tonegen]] - this module supports the tones (dial, busy, congestion) for Yate

It is understood by at least [[wavefile]] and [[tonegen]] modules.

name=tonegen,type=misc;tones=1,chans=1 (there is one tonegen channel started) ...sc;osschan=true (the osschan has just one channel, and is connected to the tonegen channel)

; inband: Send tones in audio stream :- inband: Send tones in audio stream

* '''gvoice.yate''' – located in modules. This sends DTMF tones at answer time (the “+1” you need to press to answer a call through Gv ...t are sent to GoogleVoice (add also in the default section, after the test tones are indicated, for example):