-
In SIP Channel Module are configuration parameters related to DTMFs like dtmfmethods, honor_dtmf_detect, check_allow_info, missing_allow_info.
=== dtmfmethods ===
3 KB (493 words) - 08:59, 4 November 2013
-
== Request inband DTMF detection==
If inband DTMF tones are used and the hardware does not support detecting them, Yate can p
20 KB (3,110 words) - 10:27, 4 November 2013
-
* '''transparent''' - Let the (possibly modified) DTMF message pass through; this operation is implemented at key matching stage a
* '''passthrough''' - Enter DTMF pass-through to peer mode.
5 KB (832 words) - 11:08, 4 November 2013
-
==== DTMF methods ====
...er ''dtmfmethods'' configures the allowed methods for sending or receiving DTMFs and the order they are tried:
8 KB (1,261 words) - 08:43, 4 November 2013
-
; dtmfmethods: string: Comma separated list of methods used to send DTMFs
; Also, this parameter can be overridden in chan.dtmf messages by a 'methods' parameter
13 KB (1,916 words) - 09:08, 4 November 2013
-
The '''chan.dtmf''' is used for sending DTMFs between modules in the engine.
:::the name of the module that sent the DTMF
670 B (106 words) - 16:04, 18 January 2013
-
dtmf/X - single tone, X must be 0..9, *, # or a..d
dtmfstr/''XXXXX'' - an entire sequence of DTMF tones
18 KB (1,064 words) - 10:06, 4 November 2013
-
This is used typically by RTP to send DTMF messages apparently from the channel the RTP stream belongs to.
message=chan.dtmf
2 KB (248 words) - 08:26, 14 February 2014
-
; req_dtmf: keyword: When to request DTMF notification from gateway
; none - do not request to be notified about DTMF events
8 KB (1,151 words) - 12:20, 26 October 2017
-
; dtmfinband: boolean: Enable to send the DTMF data in band on analog lines belonging
; If disabled, the DTMF will be sent through the line's hardware if possible
17 KB (2,660 words) - 08:04, 21 June 2018
-
; dtmfdetect: boolean: Set/reset DTMF detection on each zaptel channel used by
; If enabled and DTMF detection is not supported by the zaptel driver it will be disabled
11 KB (1,770 words) - 10:23, 4 November 2013
-
This page describes DTMFs send related configuration of H323 channel.
* dtmfmethods
2 KB (298 words) - 09:11, 4 November 2013
-
Inband DTMF and Fax tone detector
12 KB (1,662 words) - 13:25, 1 October 2019
-
This helper module provides inband detection of '''DTMF''', '''DNIS''', '''Fax''' and '''Continuity''' tones. The audio signal must
...s the channel to which it is attached. On detection of a continuity tone a DTMF with the text '''O''' is masqueraded.
2 KB (387 words) - 11:22, 4 November 2013
-
; If enabled and INFO is not supported the 'info' dtmf method will be disabled
; missing_allow_info: bool: The default value for dtmf info support if
25 KB (3,811 words) - 10:09, 6 July 2018
-
* '''gvoice.yate''' – located in modules. This sends DTMF tones at answer time (the “+1” you need to press to answer a call throu
...e}GoogleVoice=;called=yoursipusername;jingle_version=0;jingle_flags=noping;dtmfmethod=rfc2833
8 KB (1,258 words) - 15:25, 31 October 2013
-
...s them, then listens for DTMFs and plays back digit announcement for every dtmf. You need to provide your own digit recordings.
def on_dtmf(dtmf):
2 KB (223 words) - 11:54, 4 November 2013
-
dtmf = yield yate.onmsg("chan.dtmf",
logger.debug("Dtmf %s received." % dtmf["text"])
2 KB (207 words) - 11:58, 4 November 2013
-
* 3 - wait for DTMF "1"
"chan.dtmf",
8 KB (666 words) - 12:04, 4 November 2013
-
* 3 - wait for DTMF "1"
"chan.dtmf",
9 KB (821 words) - 12:17, 4 November 2013
