Modules
From Yate Documentation
By default Yate loads modules relevant to its current running mode:
- all modules from the base module directory
- in client mode modules from the client subdirectory
- and all modules from the qt4 subdirectory in the Qt based client
- in server mode modules from the server subdirectory
- if yjinglechan is loaded also all modules from the jabber subdirectory
You just need to list all .yate files in those directories. Which exactly are there depends on what dependency libraries are detected at configure time or what packages or components you installed.
Loading of each module is controlled by the base name of each module in the [modules] section of the relevant main config file (yate.conf or yate-qt4.conf). The default is specified by modload= in section [general] of the same file:
- if modload=yes (default) all modules are loaded if not disabled explicitely
- if modload=no only explicitely enabled modules are loaded
Software Drivers
| Modules |
|
VoIP H.323 driver requiring the OpenH323 Library
|
Hardware Drivers
- wpcard - ISDN E1/T1 driver over Wanpipe for Linux. Supports Sangoma AFT voice series cards. Very efficient. (for Yate >= 2.0)
- wpcardw - ISDN E1/T1 driver over Wanpipe for Windows. Wanpipe drivers for windows are really different from the Linux version including the API. (for Yate >= 2.0)
- zapcard - ISDN E1/T1 TDM/FXO/FXS Zaptel driver. It supports some of the cards made by Digium - E100P, T100P, TE405P, TE410P. (for Yate >= 2.0)
- wpchan - ISDN E1/T1 driver over Wanpipe for Linux. Supports Sangoma AFT voice series cards. Very efficient. (for Yate < 2.0)
- wpchanw - ISDN E1/T1 driver over Wanpipe for Windows. Wanpipe drivers for windows are really different from the Linux version including the API. (for Yate < 2.0)
- zapchan - ISDN E1/T1/BRI driver, requires Zaptel and libpri .It supports some of the cards made by Digium - E100P, T100P, TE405P, TE410P or you can use ethernet emulation and ztdummy , and also all ISDN BRI cards based on the Cologne chip - zaphfc. (for Yate < 2.0)
Signalling Modules
- mgcpca - MGCP (Media Gateway Control Protocol) - Call Agent
- CiscoSM - Cisco SLT (Signaling Link Transport) control (SS7 MTP2 backhaul over IP)
- SigTransport - SIGTRAN connection provider (SS7 over IP)
- LkSCTP - SCTP sockets provider using Linux Kernel
- isupmangler - Modifies parameters of ISUP messages passed through in STP mode
Routing Modules
- regexroute - route with regular expressions
- register - route from a database
- javascript - routing using the embedded Javascript language
- enumroute - ENUM based routing
- clustering - forwards calls to other servers in a cluster based on Node Name (Yate >= 2.0)
- callfork - it can be used for fallback routing, executes a call in parallel or sequence to multiple targets
- lateroute - makes a late routing decision, simplifies call forking and divert implementation (Yate >= 2.0)
- YRadius - routing using a radius server
- regfile - registration and routing from a file
- callcounters - adds active call counters to be used in
- isupmangler - Modifies parameters of ISUP messages passed through in STP mode
- sip_cnam_lnp - Perform CNAM and LNP queries via SIP INVITE / 3xx
- cache - CNAM and LNP memory caches. Set caller name or routing number if found in cache
Registering Modules
- accfile - this module allows Yate to act as a SIP or H.323 client
- regfile - registration and routing from a file
- register - register users in a database
- clustering - adds Node Name information to routes registered with other modules (for Yate 2)
PBX Modules
- moh - music on hold
- conference - conference room with arbitrary number of seats
- park - call parking
- pickup
- pbxassist - configurable PBX with hold, transfer and conference capabilities
- pbx - miscellaneous script-usable PBX features
- queues - queues and distributes incoming calls to operators
- dbpbx - PBX, IVR and multi routing from a database
CDR Modules
- cdrbuild module - builds the cdr so other modules can use it
- cdrfile module - writes the cdr in a file
- register - writes the cdr in a database
- callcounters - count active calls per user specified context
Transcoding Modules (codecs)
- gsmcodec - GSM 06.10 codec
- speexcodec - Speex NB, WB and UWB codec
- ilbccodec - iLBC codec
- amrnbcodec - AMR-NB codec
Test Modules
Remote Control
- rmanager - remote manager accessible from telnet
Billing Modules
External Module
- extmodule - for Linux
Database Drivers
- pgsqldb - PostgreSQL database driver
- mysqldb - MySQL database driver
Resource subscribe/notify modules
- sipfeatures - handle sip.subscribe and resource.notify messages
- register - writes the subscriptions in the database and notify the subscribers
- queuesnotify - notify changes in the status of queued calls
- presence - implements presence service for SIP clients
- subscriptions - manages rosters
Miscellaneous support modules
- tonedetect - inband DTMF and Fax tone detector
- OpenSSL - SSL/TLS sockets provider using the OpenSSL library
- LkSCTP - SCTP sockets provider using Linux Kernel
- ccongestion - Reject calls based on CPU load (depends on cpuload)
- gvoice - Google Voice support module (Yate 4+)
GUI Modules
- YateClient - a skinnable Qt4 user interface allowing the use of Yate as an universal VoIP client
Monitoring
- ysnmpagent - the SNMP agent
- cpuload - monitors CPU load
- monitoring - monitors database accounts, QoS, routing, RTP, SIP, etc.
- eventlogs - write events and alarms to log files
You will note that some modules appear in more than one category because they may implement multiple functions on top of the same protocol or connection.
